Title Comes Here
ACCESSORIES
The Logic Analyzer application enables the representation of the binary states of digital signals.
What is in the box:
– 8ch Logic Analyzer Probes
– Lifetime license with free updates
Description:
The Logic Analyzer application enables the representation of the binary states of digital signals. The Logic Analyzer can both deal with purely binary signals, such as GPIO outputs of the Raspberry Pi or Arduino board, as well as analyze different bus (I2C, SPI, and UART) and decode the transmitted data. All Red Pitaya applications are web-based and do not require the installation of any native software. Users can access them via a web browser using their smartphone, tablet or a PC running any popular operating system (MAC, Linux, Windows, Android, and iOS).
Compatibility:
– Requires STEMlab 125-10/14 or 122.88-16 board!
What is in the box:
– Logic Analyzer board integrated into an ALU case
– 8ch Logic Analyzer Probes
– Lifetime license with free updates
What is in the box:
– LCR meter board
– Ribbon cable
– SMA to SMA cable
– 2x Clip probes
The acrylic case is the most convenient option to protect your Red Pitaya STEMlab.
The ALU case is the best option to protect your Red Pitaya STEMlab with STYLE.
Compatibility:
– STEMlab 125-10
– STEMlab 125-14
– STEMlab 122.88-16
What is in the box:
– Aluminium enclosure
– 4 screws
– rubber feet
– Thermal conductive pad
What is in the box:
– 2x osciloscope probes
– 2x SMA to BCN adapter
– 2x 50 ohm termination
– 2x SMA T adapter
– WIFI dongle (only for client mode)
– 8ch Logic Analyzer Probes
What is in the box:
– sensor extension module (1pcs)
– Jupyter programming
What is in the box:
– RF swr bridge in aluminium enclosure
– SMA male calibration accessories (50 ohm, open & short loads)
– 2x SMA to SMA cable
Introducing Heatsink Interface for Red Pitaya
Although so far no Red Pitaya boards were killed by heat stroke, some of our customers feel it’s better to be on the safe side.
Keep your Red Pitaya board cool with this heatsink interface. Quality aluminum heatsink with adhesive thermal layer will protect your Red Pitaya from overheating.
- Incredibly effective cooling.
- Eliminates the risk of hardware failure due to overheating.
- Low profile, will fit into most OEM devices.
- Quiet, simple, passive cooling. No need for noisy fans.
- Perfectly sized for the Red Pitaya board.
- Comes with self adhesive thermal layer for easy application.
- Boosts long-term performance.
- Quick and simple installation.